FISHER TW8800 DIGITAL LINE TRACER

The state-of- the-art TW-8800 utilizes advanced digital signal processing for precision locating performance yet is extremely easy to use. Three active frequencies provided by the transmitter, and two passive modes for tracing without the transmitter, are provided. The lightweight multi-frequency receiver is simple to use. The display is a large and easy to read LCD that gives the user all the necessary information to do the job. A digital keypad allows the user to select the desired operating mode, set the volume level, check the battery level, or activate an LCD backlight. Depth measurement is done at the push of a button. The transmitter allows the user to locate in either a conductive or inductive mode. A meter and two switches make transmitter set up simple and quick. In the Fisher tradition, the TW-8800 is affordable, tough, and simple to use while providing maximum performance. A two year limited warranty comes standard with the unit. Receiver: Depth Accuracy: + 1 inch per foot in nominal conditions Readout Units: Inches or cm ( factory preset) Left/ Right Guidance: VCO ( varying pitch) output for easy over target location. Audio: continuous tone= Left, pulsed tone= Right. Visual: Left/ Right/ Over Target messages Signal Strength: Digital Numeric Readout ( 0-99% ) & Bar Graph Sensitivity Adjust: Automatic LCD Backlight: Included Battery Test: Automatic Low Battery alert - Push button readout Battery Type: Six " C" cells Battery Life: 80 Hours Weight: 6.0 lbs. Operating Temp: -4 0 to + 1400F ( -200 to + 600C) Transmitter: Output Frequencies: 82kHz, 8.2kHz, 820Hz Output Power ( nominal) : 82kHz: .7Watts, 8.2kHz: 7.0Watts, 820Hz: 7.0Watts Battery Test: Yes Battery Type: Two 6 Volt lantern batteries Battery Life: 80 Hours at 82kHz Weight: 7.8 lbs